IS THERE A MINIMUM PURCHASE REQUIREMENT FOR ARTIFICIAL TURF?

Synthetic turf is sold in pre-made rolls of 6 feet wide (with an exception of 6,6 feet wide for Oasis and Luxe 40 turf). The smallest roll in 6′ X 10′

HOW MUCH DOES IT COST TO INSTALL SYNTHETIC TURF?

Contact us about your specific needs by filling this form . We will quickly return a quotation, expected delivery time (if applicable), and the costs of all our lawns, so you can compare. Please note that we install synthetic turf anywhere in Quebec and in Ontario, Canada.

I DON'T SEE SOME EPDM GRANULES COLORS ON THE WEBSITE!

We are victim of our success… We are sold out on some colors of EPDM rubber granules. Stock should be coming for the Spring 2024 season.

WHAT ABOUT BINDER FOR EPDM GRANULES?

Since the pandemic, binders are hard to come by. We are trying to secure stocks. We thank you for your patience. We only have a LIMITED QUANTITY. Please contact us to reserve the quantity of aliphatic binder that you need (go to contact page).

Synthetic turf installation

Instructions how to install synthetic turf yourself, DIY artificial turf installation

If you want to install your synthetic turf yourself, please follow the guidelines below to ensure a smooth installation, and to extend the life of your product.

Professional installation

Too complicated? We can do it for you.
Ask for a free quotation for your synthetic turf install:

Synthetic turf installation video

Synthetic turf installation steps

Step 1

Prep the surface: remove old grass, excavate 4 inches deep.

Step 2

Geotextile installation: mesure, cut, nail to the ground.

Roll of geotextile 3’x 100′ sold on our website

Step 3

Fill with 3 to 4” of 0-¾ crushed stones.
Level and compact.

Step 4

Add 1” rock dirt. Level and compact.

Step 5

Unroll the piece of turf in the sun so that it recovers its shape.
Synthetic turf laying, cutting the edges on the back with an exacto.

Step 6

Glue joints with Trylawnturf’s special glue and seam tape.

Install the seam tape under the 2 parts to be joined and nail it to the ground. Align the 2 pieces to be joined, and keep the same direction of the grass yarn. Install glue on the seam tape and spread with a notched trowel. Fold the 2 pieces over the seam tape and glue, and let dry

Step 7

Nail down turf perimeter with non galvanized 6” nails, 6” apart.

Brush the entire surface of the lawn with a broom.